Dual feedback based bipolar current source with high stability for driving voice coil motors in wide temperature...

Bipolar current sources with a stability better than 0.1% in the temperature range of -30 to +70 °C are demanded for driving voice coil motors applied in a new ultra-quiet satellite platform, but almost none of the existing designs satisfy the harsh requirements. This paper presents a possible solution, which is essentially a floating-load, bipolar current source circuit with a dual feedback path. The key circuit is a composite amplifier (co-amp) composed of a high precision amplifier for error correction and a high power amplifier for load driving. The first feedback path comprises a specially designed four-wire current-sense resistor for current-to-voltage conversion and a discrete instrumentation amplifier for amplifying the converted voltage and closing the loop. The second feedback path is a proposed compensation network for loop stability. Error budgets for evaluating current stability and choosing key components of the circuit are comprehensively studied based on a derived rigorous current equation. Loop-stability problems attributable to the inductive load and the high open-loop gain of the co-amp are analyzed, and the proposed dual feedback compensation method is verified by theory, simulation, and measurement. All these contributions are demonstrated by three implemented prototypes with an output of up to ±2 A. The measured results agree well with theoretical predictions. The best and the worst stability performances of the three prototypes at +2 and -2 A are, respectively, 394 and 986 ppm in the temperature range of -30 to +70 °C, which are close to the theoretical value of 776 ppm.