Related Experiment Video
Updated: Oct 29, 2025

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Dimensionally stable anode (Doped-MMO) mediated electro-oxidation and multi-response optimization study for
Jayishnu Singla1, Ina Thakur1, Vikas Sangal2
1School of Energy and Environment, Thapar Institute of Engineering and Technology, Patiala, India.
Abstract:
In the present study, the potential application of novel doped-MMO (Ti/IrO2/Ta2O5/SnO2-Sb2O4) anodes as an alternative source to costly electrodes have been visualized for the EO treatment of urea. Parametric optimization for the treatment of urea through the EO process by doped-MMO has been done successfully. The high R2 values of both responses i.e. % Degradation and energy consumption for quadratic suggested by BBD under RSM advocates a good correlation between predicted and experimental data. The maximum % Degradation and energy consumption at optimized were found to be 91.2%, 51.53 kWh m-3 for urea respectively. Additionally, efforts were made to minimize treatment time further by implementing a dual effect, namely photo-electrocatalysis. The anode was found to be relatively stable even after 120 runs. The analysis of treated urea solution was verified in terms of total organic carbon (TOC) 90.0% reduction. The average operating cost of the electro-oxidation treatment process is determined to be 1.91 $ m-3. The results of this study demonstrate the potential of doped-MMO as a promising concept for the treatment of wastewater that can be successfully applied in real life.
More Related Videos
09:00Electrochemical Detection of Deuterium Kinetic Isotope Effect on Extracellular Electron Transport in Shewanella oneidensis MR-1
Published on: April 16, 2018
12:05Preparation of Hydrophobic Metal-Organic Frameworks via Plasma Enhanced Chemical Vapor Deposition of Perfluoroalkanes for the Removal of Ammonia
Published on: October 10, 2013