Related Experiment Video
Updated: Oct 28, 2025
Evaluating Regional Pulmonary Deposition using Patient-Specific 3D Printed Lung Models
Published on: November 11, 2020
Thinking green: modelling respirator reuse strategies to reduce cost and waste
Jacqueline Chu1,2, Omkar Ghenand3, Joy Collins4
1Division of Gastroenterology, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, USA.
Objectives:
To compare the impact of respirator extended use and reuse strategies with regard to cost and sustainability during the COVID-19 pandemic.
Design:
Cost analysis.
Setting:
USA.
Participants:
All healthcare workers within the USA.
Interventions:
Not applicable.
Main Outcome Measures:
A model was developed to estimate usage, costs and waste incurred by several respirator usage strategies over the first 6 months of the pandemic in the USA. This model assumed universal masking of all healthcare workers. Estimates were taken from the literature, government databases and commercially available data from approved vendors.
Results:
A new N95 respirator per patient encounter would require 7.41 billion respirators, cost $6.38 billion and generate 84.0 million kg of waste in the USA over 6 months. One respirator per day per healthcare worker would require 3.29 billion respirators, cost $2.83 billion and generate 37.22 million kg of waste. Decontamination by ultraviolet germicidal irradiation would require 1.64 billion respirators, cost $1.41 billion and accumulate 18.61 million kg of waste. H2O2 vapour decontamination would require 1.15 billion respirators, cost $1.65 billion and produce 13.03 million kg of waste. One reusable respirator with daily disposable filters would require 18 million respirators, cost $1.24 billion and generate 15.73 million kg of waste. Pairing a reusable respirator with H2O2 vapour-decontaminated filters would reduce cost to $831 million and generate 1.58 million kg of waste. The use of one surgical mask per healthcare worker per day would require 3.29 billion masks, cost $460 million and generate 27.92 million kg of waste.
Conclusions:
Decontamination and reusable respirator-based strategies decreased the number of respirators used, costs and waste generated compared with single-use or daily extended-use of disposable respirators. Future development of low-cost,simple technologies to enable respirator and/or filter decontamination is needed to further minimise the economic and environmental costs of masks.
Related Concept Videos
01:16Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
01:10PPE Use in Healthcare Settings II: Doffing
01:30Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
01:26Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
01:22PPE Use in Healthcare Settings I: Donning
01:14Steps in the Modeling Process
Attention is the first necessary component for observational learning. It involves focusing on what the model is doing and saying. For example, if you decide to take a drawing class to enhance your skills, you need to pay close attention to the instructor's words and hand movements. The characteristics of the model significantly...