Controlling Ultrafiltration Membrane Rejection via Shear-Aligned Deposition of Cellulose Nanocrystals from Aqueous...

Cellulose nanocrystals (CNCs) of 180 nm length and 8 nm diameter were deposited on porous supports by tangential flow filtration followed by salt permeation to form ultrafiltration membranes. At a high enough shear rate on the support surface, CNCs aligned in the direction of flow, showing a nematic order. The shear rates for transition to the nematic phase determined from rheology analysis, polarized optical microscopy, and membrane performance were consistent with one another, at ca. 10 s^-1. Permeating an AlCl₃ solution through the shear-aligned CNC deposit stabilized the CNC layer by screening repulsive electrostatic interactions, and the stable CNC layer was obtained. On changing the surface shear rate from 10 to 50 s^-1, the order parameter of CNCs increased from 0.17 to 0.7 and the rejection for Blue Dextran (5 kDa) increased from 80.4 to 92.7% and that for β-lactoglobulin (18 kDa) increased from 89.6 to 95.4%. Hence, a simple and scalable method for controlling rejection properties of ultrafiltration membranes is developed, which uses aqueous CNC suspensions to form the selective layer.