Validation of Freehand Cervical Pedicle Screw Placement in Subaxial Spine Using the "Burcev Technique": A Cadaveric...

The present study attempted to validate the "Burcev freehand method" based on anatomical observations in Indian cadavers. The study was conducted on 32 cervical pedicle screws (CPSs) that were placed in four cadavers by the authors according to the "freehand technique," described by Burcev et al, without the aid of fluoroscopy and the trajectory verified by computed tomography scans. The screws were designated as satisfactory, permissible, or unacceptable. Descriptive variables were represented in number and percentages, continuous variables were represented as mean ± standard deviation (SD). Of the 32 CPSs placed, 24 (75%) exhibited a satisfactory position, 1 (3%) exhibited a permissible position, and 7 (22%) exhibited an unacceptable position. Of the seven CPSs in the unacceptable group, four exhibited a lateral breach and three exhibited a medial breach, whereas the CPS in the permissible group exhibited a medial breach. The overall angle with contralateral lamina in the horizontal plane in terms of mean ± SD was 175.43 ± 2.82, 169.49, and 169.65 ± 6.46 degrees in the satisfactory, permissible, and unacceptable groups, respectively. In the sagittal plane, the screws exhibited an angle of 88.15 ± 3.56 degrees. No breach was observed superiorly or inferiorly. The "Burcev technique" is replicable with similar results in cadavers. Further studies must be conducted in a clinical setting to ensure its safety.