Related Experiment Video
Updated: Oct 27, 2025

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment
Published on: May 2, 2025
Multi-System Urban Waste-Energy Self-Circulation: Design of Urban Self-Circulation System Based on Emergy Analysis
1Landscape Architecture Department, Rhode Island School of Design, Providence, RI 02903, USA.
Abstract:
The current worldwide state of energy scarcity and low waste utilization has led to a decrease in the supply of ecological services, something that seriously affects the development of cities. In this study, we propose an urban self-circulation design based on multiple systems within the traditional biogas, wetland, rainwater, solar power, and urban farm systems framework to achieve effective improvements in urban waste utilization and the optimization of the urban waste-energy flow cycle. Emergy conversion is used to evaluate system optimization, and the simulation results show that the novel proposed system can effectively improve urban waste utilization with an energy output rate of 3.18 × 10, an environmental load of 4.27 × 10-2, and a sustainability index of 7.45 × 102 in the core system; additionally, it can improve resource utilization of small-scale cities with an energy output rate of 1.85 × 100, an environmental load of 1.20 × 100, and a sustainability index of 1.54 × 100 in the total system. The inter-system energy flow model can significantly optimize urban energy systems based on ecological models with low-emergy resource input, including biogas systems and urban farm systems. This model can reduce the environmental load and effectively compensate for the reduced supply capacity of ecosystem services caused by urbanization, making it suitable for extension to other small-scale built environments that are relatively independent and rich in natural resources.
More Related Videos
Related Concept Videos
Design Example: Designing a Residential Plumbing System
Energy Considerations in Open Channel Flow
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...
Design Example: Flow of Oil Through Circular Pipes

