Effect of Foaming Formulation and Operating Pressure on Thermoregulating Polyurethane Foams

The synthesis of rigid polyurethane (RPU) foams containing thermoregulatory microcapsules has been carried out under reduced pressure conditions with a new foaming formulation to reduce the final composite densities. These optimized RPU foams were able to overpass the drawbacks exhibited by the previous composites over the studied temperature range, working as insulating and thermal energy storage materials. The change in the formulation allowed to decrease the final foam density and enhance their mechanical strength. The effect of the operating pressure (atmospheric, 800 mbar, and 700 mbar) and microcapsules content (up to 30 wt%) on the physical, mechanical, and thermal PU foam properties was studied. The reduction of the pressure from atmospheric to 800 mbar did not have any effect on the cell size, strut thickness, and compression strength 10% of deformation, the Young modulus being even higher at 800 mbar. Nevertheless, a strong impact on the microstructure and mechanical properties was observed for the foam composites obtained at 700 mbar. A deleterious impact on the RPU foams thermal conductivity was observed when using low-pressure conditions. Thermal analyses showed that a composite able to work as heat accumulator and thermal insulation both at transient and at steady state was achieved.