Integrated Tapping Mode Kelvin Probe Force Microscopy with Photoinduced Force Microscopy for Correlative Chemical and...

Kelvin probe force microscopy (KPFM) is a popular technique for mapping the surface potential at the nanoscale through measurement of the Coulombic force between an atomic force microscopy (AFM) tip and sample. The lateral resolution of conventional KPFM variants is limited to between ≈35 and 100 nm in ambient conditions due to the long-range nature of the Coulombic force. In this article, a novel way of generating the Coulombic force in tapping mode KPFM without the need for an external AC driving voltage is presented. A field-effect transistor (FET) is used to directly switch the electrical connectivity of the tip and sample on and off periodically. The resulting Coulomb force induced by Fermi level alignment of the tip and sample results in a detectable change of the cantilever oscillation at the FET-switching frequency. The resulting FET-switched KPFM delivers a spatial resolution of ≈25 nm and inherits the high operational speed of the AFM tapping mode. Moreover, the FET-switched KPFM is integrated with photoinduced force microscopy (PiFM), enabling simultaneous acquisitions of high spatial resolution chemical distributions and surface potential maps. The integrated FET-switched KPFM with PiFM is expected to facilitate characterizations of nanoscale electrical properties of photoactive materials, semiconductors, and ferroelectric materials.