Related Experiment Video
Updated: Oct 26, 2025

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
Textile ageing due to atmospheric gases and particles in indoor cultural heritage
Pauline Uring1, Anne Chabas2, Stéphane C Alfaro1
1Univ Paris Est Creteil and Université de Paris, CNRS, LISA, F-94010, Créteil, France.
Abstract:
Textile fibre degradation can be due to many factors. The most common cause is light exposure, but upon the lifespan of a textile, many other environmental factors are to be taken into account. This study focuses on the role of atmospheric compounds-both particulate and gaseous species-on natural textiles ageing, more specifically cotton, silk and wool. To achieve this, reference samples of textiles were exposed to contrasted environments (marine, urban and semi-rural museums and historical buildings) for natural ageing. These conditions were also reproduced in an experimental chamber dedicated to the study of the impact of airborne pollutants on heritage materials. Experimental ageing allowed to highlight degradation mechanisms for each fibre: SO2 and HCOOH cause the cleavage of cotton's glyosidic links and silk's peptide bonds, while NO2 promotes the oxidation of the fibres. The most harmful pollutant towards cotton is NO2 since it causes both its oxidation and hydrolysis. The case of wool is more complicated: HCOOH provokes peptide link cleavage (similarly to silk) but this fibre is less sensitive to SO2 attacks than silk and even seems to be protected against future alterations after having been firstly exposed to this pollutant. In any case, this experimental study evidences that damages caused by gaseous pollutants are fostered by the presence of particles, regardless of the chemical composition of the particle coating.
Related Concept Videos
Air-entraining Agents
The Effect of Aging on Tissues
Mortar Joint Deterioration in Masonry
The...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...

