Skin-Friction-Based Identification of the Critical Lines in a Transonic, High Reynolds Number Flow via

Marco Costantini1, Ulrich Henne1, Christian Klein1

  • 1German Aerospace Center (DLR), Institute of Aerodynamics and Flow Technology, Bunsenstrasse 10, D-37073 Göttingen, Germany.

Related Concept Videos

Major Losses in Pipes01:28

Major Losses in Pipes

When a fluid flows through a pipe, it experiences energy losses due to frictional resistance along the pipe walls, known as major losses. These energy losses result in a pressure drop, which varies based on the flow conditions — whether laminar or turbulent — and the specific physical properties of the fluid and pipe.
Fluid flow can be classified as laminar or turbulent, primarily based on the Reynolds number. This dimensionless number reflects the relative influence of inertial to...
1.5K
Poiseuille's Law and Reynolds Number01:10

Poiseuille's Law and Reynolds Number

Any fluid in a horizontal tube can flow due to pressure differences—fluid flows from high to low pressure. The flow rate (Q) is the ratio of pressure difference and resistance through a horizontal tube. The greater the pressure difference, the higher the flow rate. The flow resistance is expressed as:
7.8K
Laminar Flow: Problem Solving01:24

Laminar Flow: Problem Solving

Laminar flow occurs when a fluid moves smoothly in parallel layers with minimal mixing and turbulence. In fluid mechanics, ensuring laminar flow within a pipe is essential for precise control of flow characteristics, especially in engineering applications. The key factor in determining whether flow remains laminar is the Reynolds number, a dimensionless quantity that depends on the fluid's velocity, density, viscosity, and the pipe's diameter. A Reynolds number of 2100 or lower...
287
Newtonian Fluid: Problem Solving01:18

Newtonian Fluid: Problem Solving

Newtonian fluids exhibit a constant viscosity, meaning their shear stress and shear strain rate are directly proportional. This property ensures a predictable and stable response to applied forces, maintaining a linear relationship between force and flow. Examples include water, air, and light oils, consistently demonstrating this proportional behavior regardless of external conditions.
A velocity gradient forms within the fluid when a Newtonian fluid is placed between two parallel plates, with...
575
Boundary Layer Characteristics01:18

Boundary Layer Characteristics

When a fluid encounters a solid surface, a boundary layer forms due to the interaction between the fluid's motion and the stationary surface. This phenomenon is characterized by a thin region adjacent to the surface where viscous forces dominate, influencing the fluid's velocity profile. The development of the boundary layer begins at the leading edge of the surface and evolves as the fluid moves downstream.As the fluid flows over the surface, friction between the fluid and the wall slows down...
277
Reynolds Transport Theorem01:24

Reynolds Transport Theorem

The Reynolds transport theorem provides a framework to relate the time rate of change of an extensive property within a system to that in a control volume, which is crucial for analyzing fluid dynamics. Extensive properties, such as mass, velocity, acceleration, temperature, and momentum, can be expressed in terms of the mass of a fluid portion. These properties are called extensive because they depend on the system's size, while intensive properties are their corresponding values per unit...
1.5K