Related Experiment Video
Updated: Oct 24, 2025

Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
Determination of vacuum ultraviolet detector response factors by hyphenation with two-dimensional comprehensive gas
Aleksandra Lelevic1,2, Christophe Geantet2, Chantal Lorentz2
1IFP Energies nouvelles, Rond-point de l'échangeur de Solaize BP 3, Solaize, 69360, France.
Abstract:
Two-dimensional comprehensive gas chromatography is an established technique, employed for the characterization of complex samples. Broadband vacuum ultraviolet absorption spectroscopy detection has recently attracted a lot of attention as it is a universal detection technique characterized by good selectivity but also ease of use and amenability to coupling with two-dimensional comprehensive gas chromatography. Vacuum ultraviolet spectroscopy is particularly interesting due to the possibility of performing spectral decomposition for species that coelute in gas chromatography analysis. This detector has quantitative capabilities, however not all species absorb vacuum ultraviolet radiation the same. Unfortunately, vacuum ultraviolet relative response factors for compounds are not always available. Methods to rapidly measure vacuum ultraviolet relative response factors and generate a large database that would allow calibration free quantitative analysis of complex mixtures are therefore of great interest. In this work, a universal methodology that permits rapid measurement of vacuum ultraviolet relative response factors is reported. It involves flow modulated two-dimensional comprehensive gas chromatography with dual vacuum ultraviolet and flame ionization detection. In this set-up, flame ionization detection is employed as a quantitative reference allowing to scale vacuum ultraviolet responses of investigated compounds. This approach was validated by flow measurements and by comparing relative response factors obtained for model compounds with literature data.
More Related Videos
07:57Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...