Band application of flue gas desulfurization gypsum improves sodic soil amelioration

Blending flue gas desulfurization (FGD) gypsum with surface sodic soil is a universally recognized method for the rapid amelioration of sodic soils; however, little information is available on whether other application methods (band application) will reclaim sodic soil. Three FGD gypsum application methods (single-band, dual-band and blend applications) and a control treatment (non-FGD gypsum) were carried out using sodic soil in soil bins to investigate the effects of the application method on the wetting front, major cations in the leachate during the process of water infiltration and soluble and exchangeable cations in the soil profile after infiltration. The results showed that the wetting fronts in the band treatments were denser in the horizontal direction than in the vertical direction, but the blend and control treatments only had vertical migration. The main channel of the stream in the band treatment was concentrated below the application site of FGD gypsum. The orders of desalting capacity were blend treatment, dual-band treatment and single-band treatment for the same volume of outlet water. There was no water outflow in the control treatment even after 115 days of leaching. The dual-band treatment significantly decreased the soil sodicity of the 0-40 cm soil profile, while the single-band treatment only effectively reclaimed (horizontally) half of the soil. In the blend treatment, the exchangeable sodium percentages were 21.3 % and 34.7 % at depths of 30-35 cm and 35-40 cm, respectively, and were close to zero at a depth of 0-30 cm. Compared with blend treatment, band application could be a better way to reclaim sodic soil with FGD gypsum due to its advantages of long-term and efficient amelioration with low consumption.