Coupling direct voltage and granular activated carbon modified nanoscale zero valent iron for enhancing anaerobic...

Anaerobic digestion technology has been widely used because it has a unique advantage of producing biogas as a renewable energy source. Therefore, several methods were studied to facilitate anaerobic methane production process. Coupling direct voltage and single conductive particles was an effective method to improve anaerobic wastewater treatment efficiency and methane production. However, the enhancement method was limited in this process due to the current of direct voltage or the toxicity of nanoparticles. Therefore, the granular activated carbon loaded with nanoscale zero valent iron (GAC-NZVI) particles prepared by co-precipitation method were added to the anaerobic synthetic wastewater system with direct voltage (0.10 V) to improve the treatment efficiency in this study. GAC-NZVI particles were added into anaerobic system with 0.10 V direct voltage to enhance CH₄ production process. The COD removal and total CH₄ production were enhanced by 4.22 % and 10.83 % with GAC-NZVI particles. The measurement results of EPS and Fe concentration showed that GAC-NZVI particles promoted the secretion of EPS by microorganisms, which could improve the floc strength of granular sludge. The measurements of conductivity and cyclic voltammetry (CV) showed that particles accelerated the metabolism of microorganism and promoted the electron transfer process. The increasing of Methanothrix and Methanobacterium could strengthen the methanogenesis. The abundances of bacteria and archaea using indirect interspecies electron exchange form (such as H₂ or formate transfer microorganisms) were decreased after adding the particles. The results indicated that anaerobic treatment efficiency could be enhanced under the combined action of direct voltage and particles.