Related Experiment Video
Updated: Oct 23, 2025

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
An open-source powered and ergonomic personal protective respirator for frontline COVID-19 response
Emanuel Martinez Villanueva1, Rafiq Ahmad1
1Laboratory of Intelligent Manufacturing, Design and Automation (LIMDA), Department of Mechanical Engineering, University of Alberta, Edmonton, AB T6G 2G8, Canada.
Abstract:
Intending to shield front-liners who are currently exposed to COVID-19, and because of the lack of proper powered air-purifying respirator, this study shows the design and development of an open-source ergonomic respirator with a washable filter. This device has an estimated working time of 12 h, and the tests' airflow always showed a value over 4.5 cubic feet per minute, a higher value than the national institute for occupational safety and health specification for full-face closed respirators. The proposal relies on 3D printing technology for all the custom-design parts and usages easy-to-access components for the rest of the material. The mask for the APRPAPR in the article has a defogging feature, 180 degrees of viewing angle, an ergonomic profile, and no obstruction on the mouth to show the user's full face. This respirator has an estimated cost of 318 USD, approximately one-third of the market's price of well-known brands.
Related Concept Videos
Personal Protective Equipment
PPE Use in Healthcare Settings II: Doffing
PPE Use in Healthcare Settings I: Donning
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:

