CRISPR/Cas12a-powered immunosensor suitable for ultra-sensitive whole Cryptosporidium oocyst detection from water
1ARC Centre of Excellence in Nanoscale Biophotonics, University of New South Wales, Sydney 2052, Australia; Australian Centre for NanoMedicine, University of New South Wales, Sydney 2052, Australia.
Abstract:
Waterborne pathogens, such as Cryptosporidium parvum, pose a major threat to public health globally, and this requires screening of drinking and environmental water for low number of contaminating microbes. However, current detection approaches generally require trained experts with sophisticated instruments, and are not suitable for large-scale screening and rapid outbreak response. Recent advances in ultrasensitive CRISPR/Cas-based biosensing continue to expand the range of detectable molecular targets, however single microbes could not be directly detected so far, especially in environmental samples. Here, we report an ultrasensitive CRISPR/Cas12a-powered immunosensing method suitable for microbial detection which links antibody-based recognition with CRISPR/Cas12a-based fluorescent signal amplification through an antibody-DNA conjugate. This approach is shown here to detect whole 4 µm size Cryptosporidium parvum oocysts with a linear range from 6.25 - 1600 oocysts/mL, at a maximum sensitivity of single oocyst per sample. Its potential to apply to various complex sample matrices has also been demonstrated. After sample dilution by factor of 10, we were able to detect 10 oocysts from a back-wash mud samples from water treatment plate. This method uses the same experimental setup (plate reader) as a conventional ELISA assay thus reducing the need for microscopy-based identification of Cryptosporidium, which represents the gold-standard but requires high level expertise and time-consuming manual counting. This work highlights the potential of CRISPR/Cas-based biosensing for water quality assessment and ultrasensitive whole pathogen detection.
