Single-Mode Lasing in Plasmonic-Enhanced Woven Microfibers for Multifunctional Sensing

Single-mode plasmonic lasing has great potential for use in photonic and sensing applications. In this work, single-mode lasing is realized using a plasmonic-enhanced woven microfiber that shows ultrahigh sensitivity to the ambient environment. This plasmonic-enhanced microfiber is fabricated by spraying Ag nanospheres onto rhodamine 6G-doped polymer microfibers. Single-mode laser emission with an ultranarrow linewidth (0.1 nm) and a low threshold (18.8 kW/mm²) is achieved in the microfiber using the effects of mode selection and plasmonic enhancement provided by the Ag nanospheres. A large wavelength shift in the single-mode lasing is observed when the proposed laser is used as a sensor and exposed to a humid or acidic environment. The wavelength shift is attributed to refractive index variations in the microfiber caused by either moisture absorption or chemical reactions. In humidity sensing, the laser's sensitivity is as high as 826.6 pm/% relative humidity (RH) and the detection limit is 0.051% RH. An innovative strategy for acetic acid gas sensing is proposed that uses the chemical reaction with rhodamine 6G, and its minimum response time is 5 min. Because of the microfiber's excellent fabric compatibility, a wearable sensor is fabricated by weaving the plasmonic-enhanced microfiber into clothes, and this sensor demonstrates extreme bending stability. The results reported here provide a novel approach to the design and fabrication of ultrasensitive wearable sensors for multifunctional sensing applications.