Related Experiment Video
Updated: Oct 21, 2025

Characterization and Application of Passive Samplers for Monitoring of Pesticides in Water
Published on: August 3, 2016
Air monitoring with passive samplers for perfluoroalkane substances in developing countries (2017-2019)
Pascal Camoiras González1, Mohammad Sadia1, Abeer Baabish1
1Örebro University, School of Science and Technology, MTM Research Centre, SE-701 82, Örebro, Sweden.
Abstract:
To support the global monitoring plan on persistent organic pollutants (GMP) under the Stockholm Convention, 41 countries have exposed passive air samplers equipped with polyurethane foam disks (PUFs) to monitor perfluoroalkane substances (PFAS). The recommended procedure had PUFs exposed for three months during two years; analysis was performed in one expert laboratory to generate harmonized results. Chemical analysis using Soxhlet extraction with methanol or a 60:40 MTBE:methanol mixture, solid-phase extraction and UPLC/MSMS detection posed challenges as to matrix interference and sensitivity. Single PUFs as quarterly samples and combination of up to 4 PUFs as annual samples were analyzed; all concentrations were normalized to one PUF and 3 months exposure. Exceptionally high values (up to 36 000 pg SPFOS/PUF) were observed in nine samples from Zambia where a local source was identified. For the remaining 308 PUFs, PFOA had a higher median value (188 pg/PUF) than SPFOS (125 pg/PUF) whereas the mean value of SPFOS (254 pg/PUF) was slightly higher than the mean value for PFOA (230 pg/PUF). PFHxS concentrations were much lower in concentration and detection frequency and FOSA, as the only relevant PFOS precursor compound, showed a median value of zero. No clear regional differentiation was found.
More Related Videos
09:33Visualizing Field Data Collection Procedures of Exposure and Biomarker Assessments for the Household Air Pollution Intervention Network Trial in India
Published on: December 23, 2022
09:04Identifying Per- and Polyfluorinated Chemical Species with a Combined Targeted and Non-Targeted-Screening High-Resolution Mass Spectrometry Workflow
Published on: April 18, 2019
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...