High-amplitude time reversal focusing of airborne ultrasound to generate a focused nonlinear difference frequency

Time reversal (TR) focusing of airborne ultrasound in a room is demonstrated. Various methods are employed to increase the amplitude of the focus. These methods include creating a small wooden box (or chamber) to act as a miniature reverberation chamber, using multiple sources, and using the clipping processing method. The use of a beam blocker to make the sources more omnidirectional is also examined, and it is found that for most source/microphone orientations, the use of a beam blocker increases the amplitude of the focus. A high-amplitude focus of 134 dB peak re 20 μPa sound pressure level with a center frequency of about 38 kHz is generated using TR. Using four sources centered at 36.1 kHz and another four sources centered at 39.6 kHz, nonlinear difference frequency content centered at 3.5 kHz is observed in the focus signal. The difference frequency amplitude grows quadratically with increasing primary frequency amplitude. When using beam blockers, the difference frequency content propagates away from the focal location with higher amplitude than when beam blockers are not used. This is likely due to the differences in the directionality of the converging waves during TR focusing.