Related Experiment Video
Updated: Oct 21, 2025

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
Substantial P-Type Conductivity of AlN Achieved via Beryllium Doping
Habib Ahmad1, Jeff Lindemuth2, Zachary Engel1
1School of Electrical and Computer Engineering, Georgia Institute of Technology, 777 Atlantic Dr NW, Atlanta, GA, 30332-0250, USA.
Abstract:
Beryllium has long been predicted by first principle theory as the best p-type dopant for GaN and AlN. But experimental validation of these theories has not, until now, borne out the original predictions. A key challenge is the dopant-induced strain leading to Be rejection from substitutional sites in favor of interstitial sites, leading to self-compensation. More flexible growth methods like metal modulated epitaxy (MME) that can operate at substantially lower temperatures than traditional approaches, can more effectively place Be into the proper substitutional lattice sites. MME grown Be-doped AlN shows substantial p-type conductivity with hole concentrations in the range of 2.3 × 1015 -3.1 × 1018 cm-3 at room temperature. While others have achieved sizable carrier concentrations near surfaces via carbon doping or Si implantation, this is the only known demonstration of substantial bulk p-type doping in AlN and is a nearly 1000 times higher carrier concentration than the best previously demonstrated bulk electron concentrations in AlN. The acceptor activation energy is found to be ≈37 meV, ≈8 times lower than predicted in literature but on par with similar results for MME p-type GaN. Preliminary results suggest that the films are highly compensated. A p-AlN:Be/i-GaN:Be/n-GaN:Ge pin diode is demonstrated with substantial rectification.
More Related Videos
14:16Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
13:09Assessment of Boron Doped Diamond Electrode Quality and Application to In Situ Modification of Local pH by Water Electrolysis
Published on: January 6, 2016
Related Concept Videos
Types of Semiconductors
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
P-N junction