Optical Wavelength Selective Photoactuation of Nanometal-Doped Liquid Crystalline Elastomers by Using Surface Plasmon...

Photoactuated liquid crystalline elastomer (LCE) materials are gaining much attention in many application fields, but challenges for the precise modulation of their photoresponses still exist. Researchers have explored various optical parameters, such as polarization, intensity, and wavelength, to obtain differential responses. The development of photoactuated LCE materials with wavelength-selective responsiveness is more versatile and has attracted more interest, but such LCE materials are commonly prepared by incorporating different molecular chromophores or dyes into the LCE matrices. When the surface plasmon resonance (SPR) characteristic of nanometals, which can generate strong photothermal conversion, and the difference of SPR absorption wavelength bands of different nanometals are considered, a strategy of constructing wavelength-selective actuation of LCE materials by using the SPR photothermal effect can be demonstrated, as done herein. The LCE nanocomposites doped by nanogold or nanosilver were fabricated and exhibited good SPR absorption but in different wavelength bands of the visible spectrum range. They had strong actuation under light irradiation with the wavelengths being inside their respective absorption band but could not be effectively actuated by the light beyond their respective absorption band. A smart electronic device, implementing a hierarchical structured LCE nanocomposite doped by nanogold and nanosilver in different domains as the two-switch actuator, was prepared and capable of outputting different signals in response to the different wavelength bands filtered from a light source, which released the actuator from the restriction of light scanning direction or position. Our work provides new insights for the convenient and precise photoactuation of the LCE actuators.