Effect of Yield Strength Distribution Welded Joint on Crack Propagation Path and Crack Mechanical Tip Field

Due to the particularity of welding processes, the mechanical properties of welded joint materials, especially the yield strength, are unevenly distributed, and there are also a large number of micro cracks, which seriously affects the safety performance of welded joints. In this study, to analyze the effect of the uneven distribution of yield strength on the crack propagation path of welded joints, other mechanical properties and residual stresses of welded joints are ignored. In the ABAQUS 6.14 finite element software, the user-defined field (USDFLD) subroutine is used to define the unevenly distributed yield strength, and extended finite element (XFEM) is used to simulate crack propagation. In addition, the static crack finite element model of the welded joint model is established according to the crack propagation path, which is given the static crack model constant stress intensity factor load, and the influence of an uneven yield strength distribution on mechanical field is analyzed. The results show that the crack length of welded joints as well as the plastic deformation range of the crack tip in high stress areas can be reduced with the increase of yield strength along the crack propagation direction. Moreover, the crack deflects to the low yield strength side. This study provides an analytical reference for the crack path prediction of welded joints.