Experimental Study on Solidification and Stabilization of Heavy-Metal-Contaminated Soil Using Cementitious Materials

In order to solve the shortcomings of the traditional curing agent in the treatment of composite heavy-metal-contaminated soil with the solidification and stabilization method, a new type of cementing material A was used as a curing agent, and the Pb, Cd, Cu composite heavy-metal-contaminated soil was artificially prepared to carry out an experimental study on solidification and stabilization (SS) restoration by the mechanical properties test, leaching performance test, and microscopic test. The results show that in the range of test dosage, with the increase in the curing agent content, the unconfined compressive strength of the solidified body increased, and the resistance to deformation was enhanced. From the perspective of leaching characteristics, the new curing agent A had an excellent curing effect on the composite heavy-metal-contaminated soil. To achieve safe disposal, a curing agent content of 10% applies only for the soil heavily contaminated by heavy metals. The curing agent A could significantly reduce the content of acid-extractable heavy metals after solidifying the heavy metal Pb, Cd, and Cu composite contaminated soil and effectively converted it into a residue state. The solidified phase contained hydrated products such as calcium silicate hydrate (CSH) and ettringite (AFt). These hydrated products can inhibit the leaching performance of heavy metal ions through adsorption, encapsulation, and ion exchange. The study provides a feasible method and reference for the solidification, restoration, and resource utilization of heavy-metal-contaminated soil in the subgrade.