Binary vanadium pentoxide carbon-graphene foam composites derived from dark red hibiscus sabdariffa for advanced...

The development of advanced electrode materials derived from biomass for the next generation of energy storage devices, such as supercapacitors with high specific energy and specific power coupled with a good cycle stability, is required to meet the high demand for electric vehicles and portable devices. In this study, sustainable binary vanadium pentoxide carbon-graphene foam composites (V₂O₅@C-R₂HS/GF) were synthesized using a solvothermal method. The X-ray diffraction, Raman and FTIR techniques were used to study the structural properties of the composites (V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF). The SEM micrographs displayed an accordion-like morphology resulting from the graphene foam-modified V₂O₅@C-R₂HS composite. The V₂O₅@C-R₂HS, V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF composites were evaluated in a three-electrode configuration using 6 M potassium hydroxide (KOH) as an aqueous electrolyte. Furthermore, a two-electrode device was carried out by fabricating an asymmetric device (V₂O₅@C-R₂HS/GF//AC) where V₂O₅@C-R₂HS/20 mg GF was used as a positive electrode and activated carbon (AC) as a negative electrode at a cell voltage of 1.6 V in 6 M KOH. The V₂O₅@C-R₂HS/GF//AC showed a high specific energy and specific power values of 55 W h kg^-1 and 707 W kg^-1, respectively, at a specific current of 1 A g^-1. The asymmetric device presented a good stability test showing 99% capacity retention up to 10 000 cycles and was confirmed by the floating time up to 150 h with specific energy increasing 23.6% after the first 10 h. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.