Related Experiment Video
Updated: Oct 20, 2025

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
Development and performance assessment of new solar and fuel cell-powered oxygen generators and ventilators for
O Siddiqui1, H Ishaq1, I Dincer1
1Clean Energy Research Laboratory, Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario, L1H 7K4, Canada.
Abstract:
In this study, a new solar-based fuel cell-powered oxygenation and ventilation system is presented for COVID-19 patients. Solar energy is utilized to operate the developed system through photovoltaic panels. The method of water splitting is utilized to generate the required oxygen through the operation of a proton exchange membrane water electrolyser. Moreover, the hydrogen produced during water splitting is utilized as fuel to operate the fuel cell system during low solar availability or the absence of solar irradiation. Transient simulations and thermodynamic analyses of the developed system are performed by accounting for the changes in solar radiation intensities during the year. The daily oxygen generation is found to vary between 170.4 kg/day and 614.2 kg/day during the year. Furthermore, the amount of daily hydrogen production varies between 21.3 kg/day and 76.8 kg/day. The peak oxygen generation rate attains a value of 18.6 g/s. Moreover, the water electrolysis subsystem entails daily exergy destruction in the range of 139.9-529.7 kWh. The maximum efficiencies of the developed system are found to be 14.3% energetically and 13.4% exergetically.
Related Concept Videos
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Batteries and Fuel Cells
Respiratory Capacities
One key metric is the Inspiratory Capacity (IC), which represents the maximum amount of air that can be inhaled with full effort. IC is calculated by summing the tidal volume and inspiratory reserve volume, typically ranging from 2.4 to 3.6 liters.
The Functional Residual Capacity (FRC) represents the air in the...
Treatment for Pulmonary Arterial Hypertension: Oxygen Therapy for Respiratory Failure
Oxygen therapy is vital in increasing and maintaining blood oxygen levels in PAH patients. As a result, it aids in reducing fatigue,...

