Related Experiment Video
Updated: Oct 20, 2025

Demonstration of Equal-Intensity Beam Generation by Dielectric Metasurfaces
Published on: June 7, 2019
A multifunctional ultrathin flexible bianisotropic metasurface with miniaturized cell size
Tania Tamoor1, Nosherwan Shoaib2, Fahad Ahmed1
1National University of Sciences and Technology (NUST), Research Institute for Microwave and Millimeter-Wave Studies (RIMMS), Islamabad, 44000, Pakistan.
Abstract:
In this paper, a flexible bianisotropic metasurface possessing omega-type coupling is presented. The designed metasurface behaves differently when excited from either forward (port 1) or back (port 2) sides. It provides an absorption of 99.46% at 15.1 Gigahertz (GHz), when illuminated from port 1, whereas, on simultaneous illumination from port 2, it behaves like a partially reflective surface (PRS). Furthermore, the presented metasurface not only acts as an in-band absorptive surface (port 1) and partially reflective surface (port 2), but it also provides 97% out-of-band transmission at 7.8 GHz. The response of the presented metasurface remains the same for both transverse Electric (TE) and transverse magnetic (TM) polarized wave or any arbitrary linearly polarized wave. Additionally, the response of the metasurface is angularly stable for any oblique incidence up to 45º. The proposed ultrathin flexible metasurface with absorption, partial reflection and out-of-band transmission properties can be used in the Fabry Perrot cavity antenna for gain enhancement with radar cross-section (RCS) reduction both for passband and stop-band filtering, and conformal antenna applications.

