Powdered activated carbon doping improves the mechanical and adsorption properties of cementitious microfiltration...

Cementitious membrane (CM) is a promising microfiltration membrane with low cost for raw materials and low energy consumption of non-sintering fabrication process. A novel carbon-cementitious microfiltration membrane (CCM) was fabricated with powdered activated carbon (PAC) as an additive based on CM, to solve the low mechanical strength of CM during multiple practical uses. While maintaining adequate pure water flux and porosity, the mechanical strength of the membrane was greatly improved to ensure the stability of the membrane in the filtration process. The bending strength of the CCM was 2-3 times higher than that of CM. 10 wt% CCM has the smallest critical pore size and optimal permeability, which was chosen to be the optimal PAC doping ratio. The X-ray diffraction and FT-IR results indicated that the addition of PAC did not change the mineral composition of cement hydration products, and the appropriate amount of PAC acted as a nucleation site and accelerated hydration. The effect of size effect on bending strength was more obvious with the decrease of membrane thickness. In the membrane adsorption experiments of benzophenone-4, nitrobenzene and p-chloronitrobenzene, the CCM exhibited prominent adsorption properties than CM. These results broaden the application scope of microfiltration membranes in water treatment process.