Wireless sensor networks for pharmaceutical lyophilization: Quantification of local gas pressure and temperature in...

Wireless sensor networks have become prolific in a wide range of industrial processes and offer several key advantages over their wired counterparts in terms of positioning flexibility, modularity, interconnectivity, and data routing. We demonstrate their utility in pharmaceutical lyophilization by developing a series of wireless devices to measure spatial variations in gas pressure and temperature during primary drying. The influence of shelf temperature, chamber pressure, excipient concentration, and dryer configuration are explored for various representative cycles using a laboratory-scale pharmaceutical lyophilizer. Pressure and temperature variations across the shelf for these cases are shown to vary up to 1.2 Pa and 10 °C, respectively. Experimental measurements are supported by computational fluid dynamics simulations to reveal the mechanisms driving the vapor flow. The measurements and simulation data are then combined to estimate the shelf-wise sublimation rate in the inverse sense to within a deviation of 3% based on comparison with gravimetric data. We then apply the sublimation rate profile to obtain the vial heat transfer coefficient and product mass transfer resistance for a 5% w/v mannitol formulation. Finally, these parameters are applied to a one-dimensional quasi-steady heat transfer model to predict the evolution of the product temperature over the course of primary drying. Thermocouple measurements of product temperature are compared directly to the simulated data and demonstrate accuracy comparable to existing published one-dimensional models.