Evaluation of the effects of starch on polyhydroxybutyrate electrospun scaffolds for bone tissue engineering...

Efficient design for bone tissue engineering requires an understanding of the appropriate selection of biomimetic natural or synthetic materials and scalable fabrication technologies. In this research, poly (3-hydroxybutyrate) (PHB) and starch (5-15 wt%) as biological macromolecules were used to fabricate novel biomimetic scaffolds by electrospinning method. SEM results of electrospun scaffolds revealed bead-free nanofibers and three-dimensional homogenous structures with highly interconnected pores. Results of FTIR and Raman demonstrated that there were hydrogen bonds between the two polymers. The tensile strength of scaffolds was significantly improved by adding starch up to 10 wt%, from 3.05 to 15.54 MPa. In vitro degradation and hydrophilicity of the scaffolds were improved with the presence of starch. The viability and proliferation of MG-63 cells and alkaline phosphatase (ALP) activity were remarkably increased in the PHB-starch scaffolds compared to the PHB and control samples. The mineralization and calcium deposition of MG-63 cells were confirmed by alizarin red staining. It is concluded that PHB/starch electrospun scaffold could be a good candidate for bone tissue engineering applications.