Related Experiment Video
Updated: Oct 18, 2025

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
Method of Predicting the Crimp of Jacquard-Woven Fabrics
Eglė Kumpikaitė1, Eglė Lapelytė1, Stasė Petraitienė2
1Department of Production Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentų Str. 56, LT-51424 Kaunas, Lithuania.
Abstract:
The aim of this study was to investigate the distribution of crimp in new jacquard fabric structures (in which one-layer and two-layer weaves are combined) in the fabric width and to create a method of crimp prediction. It was established that crimp was around 18.80% and changed within the limits of errors, i.e., a range of only ~4%, in the fabric width. It can therefore be said that the warp crimp was constant in the fabric width. Because the warp crimp of jacquard fabric changed insignificantly (within the limits of errors), it can be stated that the fabric-setting parameters and structural solutions were chosen and matched correctly, and such fabric can be woven on any jacquard weaving loom.
More Related Videos
07:06Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes
Published on: January 27, 2017
08:39Fabrication of Compressed Hosiery and Measurement of its Pressure Characteristic Exerted on the Lower Limbs
Published on: May 27, 2020
Related Concept Videos
Yield Criteria for Ductile Materials under Plane Stress
The Maximum Shearing Stress Criterion, also known as...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...