Related Experiment Video
Updated: Oct 18, 2025

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Influence of Geocomposite Properties on the Crack Propagation and Interlayer Bonding of Asphalt Pavements
Sara Spadoni1, Lorenzo Paolo Ingrassia1, Giulio Paoloni2
1Department of Civil and Building Engineering and Architecture (DICEA), Università Politecnica delle Marche, Via Brecce Bianche, 60131 Ancona, Italy.
Abstract:
The application of geocomposites as reinforcement in asphalt pavements is a promising solution for the maintenance/rehabilitation of existing pavements and for the construction of new pavements, whose effectiveness strongly depends on the physical and mechanical properties of the geocomposite. This study aims at assessing the influence of four different geocomposites, obtained by combining a reinforcing geosynthetic with a bituminous membrane, on the crack propagation and interlayer bonding of asphalt pavements. First, a laboratory investigation was carried out on double-layered asphalt specimens. The crack propagation resistance under static and dynamic loads was investigated through three-point bending tests (carried out on specimens with and without notch) and reflective cracking tests respectively, whereas the interlayer shear strength was evaluated through Leutner tests. Then, a trial section was constructed along an Italian motorway and a Falling Weight Deflectometer (FWD) testing campaign was carried out. The laboratory investigation highlighted that-as compared to the unreinforced system-the geocomposites increased the crack propagation energy in the layer above the reinforcement from five to ten times, indicating that they can significantly extend the service life of the pavement by delaying bottom-up and reflective cracking. However, they also worsened the interlayer bonding between the asphalt layers (de-bonding effect). The field investigation indicated that all geocomposites decreased the stiffness of the asphalt layers with respect to the unreinforced pavement as a consequence of the de-bonding effect, thus corroborating the laboratory results. Based on the results obtained, it is desirable that the geocomposite possess a high energy dissipation capability and an upper coating ensuring good adhesion between the asphalt layers. The monitoring of the existing trial section in the future will provide useful data on the long-term field performance of reinforced pavements subjected to actual motorway traffic.
Related Concept Videos
Microcracking in Concrete
Bonding and Strength of Aggregate
Masonry Paving
Permeability of Concrete
Design Example: Joints in Concrete Pavements
Contraction joints are typically formed by sawing a groove into the concrete shortly after it has hardened. This creates a weakened vertical plane, deliberately encouraging cracking at...
Types of Non-structural Cracks in Concrete
Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.

