Related Experiment Video
Updated: Oct 18, 2025

Integration of 5G Experimentation Infrastructures into a Multi-Site NFV Ecosystem
Published on: February 3, 2021
Development and Validation of a Railway Safety System for Nordic Trains in Isolated Territories of Northern Quebec
Laurent Ferrier1,2, Hussein Ibrahim2, Mohamad Issa3
1Wind Energy Research Laboratory, Université du Québec à Rimouski, Rimouski, QC G5L 3A1, Canada.
Abstract:
Connected objects are deployed all over the world. Thus, they are contributing to improving communications. In urban areas, technological challenges are gradually being overcome, and advances in this area are exponential. Unfortunately, isolated territories such as northern Quebec do not beneficiate from this technological progress. Yet, northern Quebec relies on abundant natural resources, with notably its huge hydroelectric dams and iron mines, and therefore, the region's economic life revolves essentially around the exploitation of these resources and is heavily reliant on rail transportation. However, according to Transport Canada, 1246 railroad accidents were reported in 2019 to the Transportation Safety Board (TSB). Thirty-eight people described as trespassers lost their lives, and five railroad employees were fatally injured. In this context, we present the implementation of a security system in an isolated environment for employees intervening on the railroad track to warn them of the imminent arrival of a train. Due to the context of the isolated environment, i.e., without an electrical network, without internet, and without an LTE network, a solution for employees has been developed using a Zigbee telecommunication system and a connected watch. A case study on a train operating in a remote and isolated area in northern Quebec is presented to validate the performance of the proposed system based on an open-source and customizable solution.
Related Concept Videos
Pilot and Numeric Relaying
Electrical Systems
To derive the transfer function, consider...
Differential Relays
Radial System Protection
In a radial system with a fault downstream of the third breaker, ideally, only the third breaker will open, isolating the fault and interrupting the load connected beyond it. The second breaker has a longer delay setting,...
Line Protection with Impedance Relays
Under normal conditions, low load currents keep the measured...
Directional Relays

