Related Experiment Video
Updated: Oct 18, 2025

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
An Improved P-Type Doped Barrier Surface AlGaN/GaN High Electron Mobility Transistor with High Power-Added Efficiency
Hujun Jia1, Xiaowei Wang1, Mengyu Dong1
1School of Microelectronics, Xidian University, Xi'an 710071, China.
Abstract:
An improved P-type doped barrier surface AlGaN/GaN high electron mobility transistor with high power-added efficiency (PDBS-HEMT) is proposed in this paper. Through the modelling and simulation of ISE-TCAD and ADS software, the influence of the P-type doped region on the performance parameters is studied, and the power-added efficiency (PAE) obtained and effectively improved is further verified. The drain saturation current and the threshold voltage of PDBS-HEMT has no major change compared with the traditional structure; the peak transconductance decreases slightly, but the breakdown voltage is significantly enhanced. Furthermore, the gate-source capacitance and gate-drain capacitance are reduced by 14.6% and 14.3%, respectively. By simulating the RF output characteristics of the device, the maximum oscillation frequency of the proposed structure is increased from 57 GHz to 63 GHz, and the saturated output power density is 10.9 W/mm, 9.3 W/mm and 6.4 W/mm at the frequency of 600 MHz, 1200 MHz and 2400 MHz, respectively. The highest PAE of 88.4% was obtained at 1200 MHz. The results show that the PDBS structure has an excellent power and efficiency output capability. Through the design of the P-type doped region, the DC and RF parameters and efficiency of the device are balanced, demonstrating the great potential of PDBS structure in high energy efficiency applications.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
P-N junction
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Schottky Barrier Diode

