Stabilized Solid Electrolyte Interphase Induced by Ultrathin Boron Nitride Membranes for Safe Lithium Metal Batteries

Lithium-ion batteries (LIBs) are still facing safety problems, mainly due to dendrite growth on the anode that leads to combustion and explosion. Forming a stable solid electrolyte interface (SEI) layer is an effective way to suppress this. To induce the formation of stable SEI using simple methods at a low cost, we report an ultrathin and large-scale hexagonal boron nitride (h-BN)/polyimide (PI) layer that was coated on a commercial polypropylene (PP) separator. The formation of a stabilized SEI component induced by the h-BN coating layer is proposed, as suggested by theoretical calculations and confirmed by electrochemical analysis and spectroscopy. It effectively suppresses Li dendrite growth and reduces the consumption of active lithium. The separator also has good electrolyte wettability, excellent mechanical strength and thermal conductivity, and high thermal stability. When using the h-BN modified separator in a full cell, the capacity is extremely stable after long cycling and high temperature.