Related Experiment Video
Updated: Oct 18, 2025

Fabrication and Testing of Microfluidic Optomechanical Oscillators
Published on: May 29, 2014
A novel Ka-band coaxial transit time oscillator with internal extraction
Xingfu Gao1, Lili Song1, Haoran Zhang1
1College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, People's Republic of China.
Abstract:
In this paper, a Ka-band coaxial transit time oscillator (TTO) with internal extraction is proposed. Particle-in-cell simulation of this oscillator is performed to obtain results as follows: under the conditions of a diode voltage of 459 kV, current of 3.9 kA, and guiding magnetic field of 0.5 T, microwaves with an output power of 0.75 GW and a frequency of 31.4 GHz can be achieved with an efficiency of 42% and a saturation time of nearly 25 ns. Moreover, the asymmetric mode competition is suppressed in the preliminary experiments. The study of a Ka-band TTO aims to extend the working frequency of high power microwave sources to a higher level. Such a device has three merits. First, it implements high power and high efficiency. Second, the internal extraction of the microwave output decreases the over-mode ratio in the microwave extraction region. Third, the over-mode ratio of the internal extraction is smaller compared with the external extraction, which can effectively suppress asymmetric mode competition.
Related Concept Videos
Oscillations In An LC Circuit
Energy Stored In A Coaxial Cable
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic...
Transmission Line Design Considerations
RLC Circuit as a Damped Oscillator
Consider a series RLC circuit. Here, the presence of resistance in the circuit leads to energy loss due to joule heating in the resistance. Therefore, the total electromagnetic energy in the circuit is no longer constant and decreases with time. Since the magnitude of charge, current, and potential difference continuously decreases, their oscillations are said to be damped. This is...
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...
Propagation Speed of Electromagnetic Waves

