Benchtop Bioreactors in Mammalian Cell Culture: Overview and Guidelines

Bioreactors are manufactured apparatuses that allow the generation of a specific environment for the highly controlled cultivation of living cells. Originally used for microbial production systems, they have found widespread applications in fields as diverse as vaccine production, plant cell cultivation, and the growth of human brain organoids and exist in equally diverse designs (Chu and Robinson, Curr Opin Biotechnol 12(2):180-187, 2001; Qian et al., Nat Protoc 13:565-580, 2018). Manufacturing of biologics is currently mostly performed using a stirred tank bioreactor and CHO host cells and represents the most "classical" bioreactor production process. In this chapter, we will therefore use the cultivation of suspension Chinese hamster ovary (CHO) cells for recombinant protein production in a stirred tank bioreactor as an example. However, general guidelines provided in this chapter are transferable to different bioreactor types and host cells (Li et al., MAbs 2(5):466-479, 2010).The preparation and operation of a bioreactor (also referred to as upstream process in a biotechnological/industrial setting) is comprised of three main steps: expansion (generation of biomass), production (batch, fed-batch, or continuous process), and harvest. The expansion of cells can last from few days to weeks depending on the number of cells at the start, the cellular doubling time, and the required biomass to inoculate the production bioreactor. The production phase lasts a few weeks and is a highly sensitive phase as the concentration of different chemicals and physical parameters need to be tightly controlled. Finally, the harvest will allow the separation of the product of interest from large particles and then the desired material (cell culture supernatant or cells) is transferred to the downstream process.The raw materials used during the upstream phase (all three steps) need to be aligned with the final purpose of the manufactured product, as the presence of residual impurities may have an impact on suitability of the final product for a desired purpose.