Related Experiment Video
Updated: Oct 17, 2025

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
Three-dimensional polymer mode (de)multiplexer with cascaded tapered couplers for on-board optical interconnects
Abstract:
A three-dimensional polymer mode (de)multiplexer based on mode evolution is proposed. The proposed configuration is mainly composed of cascaded two tapered couplers where waveguides with different heights are inversely tapered to achieve mode conversions of the E11,E21, and E31 modes. The dimensional parameters and characteristics are analyzed by the beam propagation method. This mode (de)multiplexer exhibits the coupling ratio greater than 0.97, excess loss lower than 0.15 dB and extinction ratio higher than 20 dB for TE and TM polarizations over the wavelength range 1530∼1625nm (the C+L band). This design has weak wavelength dependence and polarization dependence, which is promising to be applied to broadband on-board mode multiplexing.
More Related Videos
Related Concept Videos
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.

