Enhancing the light extraction efficiency for AlGaN-based DUV LEDs with a laterally over-etched p-GaN layer at the...

It is known that light extraction efficiency (LEE) for AlGaN-based deep ultraviolet light-emitting didoes (DUV LEDs) can be enhanced by using truncated cone arrays with inclined sidewalls. In this work, the air-cavity-shaped inclined sidewall is applied and the p-GaN layer at the top of the truncated cone is laterally over-etched so that more light escape paths are generated for AlGaN-based DUV LEDs. The experimental results manifest that when compared with DUV LEDs only having the air-cavity-shaped inclined sidewall, the optical power for the DUV LEDs with laterally over-etched p-GaN at the top of the truncated cone is enhanced by 30% without sacrificing the forward bias. It is because the over-etched p-GaN makes little effect on the carrier injection and does not affect the ohmic contact resistance. Moreover, the simulation results show that the truncated cone with laterally over-etched p-GaN layer can enhance the LEE because the reduced p-GaN area can suppress the optical absorption and supplies additional light paths for DUV photos. Then, more light will be reflected into escape cones at the sapphire side.