In-process measurement of a keyhole using a low-coherence interferometer with a high repetition rate

The shape of an instance hole (keyhole) created via a high-power laser was measured using a low-coherence interferometer with the following parameters: repetition rate, 10 MHz; center wavelength, 1550 nm; absolute spatial resolution, 10 µm; and measurement range, 5 mm. The keyhole was created on a 3-mm-thick stainless-steel plate using a high-power laser with 8-kW peak power and 1070-nm center wavelength. The cross-sectional area of the keyhole was measured to be 0.42 mm × 0.78 mm (width × depth) using the interferometer, and its side dimension was 0.46 mm × 0.78 mm (width × depth).