Related Experiment Video
Updated: Oct 17, 2025

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction
Published on: April 10, 2018
Waste straw derived Mn-doped carbon/mesoporous silica catalyst for enhanced low-temperature SCR of NO
Zheng Gong1, Bangda Wang2, Wenhua Chen2
1College of Architecture and Environment, Sichuan University, Chengdu 610065, People's Republic of China.
Abstract:
This work proposed a new strategy for the high value utilization of waste straw, in which a Mn-doped carbon/mesoporous silica composite catalyst was prepared by simultaneous utilization of carbon and silicon source from straw for low-temperature denitration. The results showed that the NO conversion rate reached 93% at 180℃ for the composite catalyst with Si/C mass ratio of 35% (Mn/ACMS (35%)). This was significantly higher than those of the activated carbon catalyst (Mn/AC) and mesoporous silica catalyst (Mn/MS), i.e., 58% and 50%, respectively. The SEM images showed that mesoporous silica nanoparticles were dispersed evenly on the carbon surface to form composite materials. XPS results indicated that Mn/ACMS (35%) catalyst showed higher content of chemically adsorbed oxygen (Oα) and Mn4+ (54.67% and 46.81%) than Mn/AC catalyst (34.38% and 17.49%) and Mn/MS catalyst (32.71% and 30.18%), which was responsible for the improved catalytic activity. Moreover, NH3-TPD results revealed that Mn/ACMS (35%) had high surface acidity of 6.47 mmol·g-1, significantly higher than Mn/AC catalyst of 1.51 mmol·g-1, which was beneficial for adsorbing NH3. H2-TPR results suggested that Mn/ACMS (35%) catalyst had much higher H2 consumption of 1.32 mmol·g-1 than Mn/AC and Mn/MS catalyst, suggesting better redox performance. The results demonstrated that the straw derived Mn-doped carbon/mesoporous silica composite catalyst can be a potential material for low-temperature denitration.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
08:40Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021
Related Concept Videos
Catalysis
Ziegler–Natta Chain-Growth Polymerization: Overview
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...