Related Experiment Video
Updated: Oct 17, 2025

Gyroid Nickel Nanostructures from Diblock Copolymer Supramolecules
Published on: April 28, 2014
Formation and Growth of Intermetallic Compounds during Reactions between Liquid Gallium and Solid Nickel
Doyoung Lee1, Chang-Lae Kim2, Yoonchul Sohn1
1Department of Welding and Joining Science Engineering, Chosun University, Gwangju 61452, Korea.
Abstract:
Liquid metals, such as Ga and eutectic Ga-In, have been extensively studied for various applications, including flexible and wearable devices. For applying liquid metal to electronic devices, interconnection with the various metal electrodes currently in use, and verifying their mechanical reliability are essential. Here, detailed investigations of the formation and growth of intermetallic compounds (IMCs) during the reactions between liquid Ga and solid nickel were conducted. Ga and Ni were reacted at 250, 300, and 350 °C for 10-240 min. The IMC double layer observed after the reactions contained a Ga7Ni3 bottom layer formed during the reactions, and a GaxNi top layer (with 89-95 at.% of Ga) precipitated during cooling. Numerous empty channels exist between the rod-type Ga7Ni3 IMCs. Ga7Ni3 growth occurred only in the vertical direction, without lateral coarsening and merging between the rods. The time exponents were measured at 1.1-1.5, implying that the reaction kinetics were near-interface reaction-controlled. The activation energy for Ga7Ni3 growth was determined as 49.1 kJ/mol. The experimental results of the Ga-Ni reaction study are expected to provide important information for incorporating liquid metals into electronic devices in the future.
Related Concept Videos
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Formation of Complex Ions
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability....
Bonding in Metals

