Controlling waste by waste: a modified landfill leachate coagulation sludge activated peroxymonosulfate process...

In this study, a modified coagulation sludge (MCS) from a real landfill leachate coagulation pretreatment was first prepared with polymerized ferric sulfate (PFS) as the activator for PMS to degrade bisphenol A (BPA). The results showed that 43.34% of BPA was adsorbed by MCS when [BPA]₀ = 20 mg/L, [MCS]₀ = 0.8 g/L, and time = 80 min. Thereafter, by adding 3000 mg/L PMS to initiate the oxidation process, complete BPA removal, i.e. 100%, was achieved in 60 min. In addition, in tap water and municipal wastewater scenarios, 100% and 90.07% removal of BPA were obtained, respectively, and MCS exhibited outstanding performance after repeated use. MCS displayed an excellent adsorption capacity in which chemical adsorption was the main effect, and hydroxyl radicals were the major contributor to BPA degradation. Characterizations of fresh and reacted MCS were conducted, and the results showed that the MCS structure was stable after repeated use, and the surface functional groups, surface defect sites, and iron oxides participated in PMS activation. Overall, this study demonstrated successful recycling of coagulation sludge from landfill leachate pretreatment to activate PMS for environmental pollution control, which is in accordance with the goal of using waste to control waste.