Lignite, dewatered lignite and modified subbituminous coal reduce nitrogen loss from broiler litter

Broiler litter is generated in large quantities as a waste by-product of chicken meat production. N may be lost from the litter and emitted from bird housing as gaseous NH₃, which can be damaging to the environment and limit the recycling of a valuable nutrient. This study investigated the effect of lignite application rate (0, 5, 10, 15, 20%) on N loss from broiler litter in a static chamber laboratory incubation. Lignite was subsequently dewatered and subbituminous coal modified by aerobic thermal oxidation and their ammoniacal N adsorption potentials were characterised. In a second static chamber incubation, the capacity of these materials (applied at 20%) to reduce N loss from litter was investigated. Finally, their potential to directly reduce NH₃ emissions was examined using a chamber acid trap system. This study showed that lignite reduced N loss when applied to litter at a rate ≥ 5%, with the amount of N retained increasing with increasing lignite application rate. Litter treated with 20% lignite retained 24% more N than untreated litter. Following aerobic thermal treatment, maximum ammoniacal N adsorption capacities of the materials were as follows: lignite > dewatered lignite > modified subbituminous coal > subbituminous coal. Despite inequalities in adsorption capacity, lignite, dewatered lignite and modified subbituminous coal reduced total N loss by 17.3, 18.2 and 18.4% and NH₃ emissions by 41.6, 49.1 and 29.8%, respectively. This study demonstrates the potential of coal-based materials to reduce NH₃ emissions from broiler litter and increase the nutrient value of waste by reducing N loss.