Related Experiment Video
Updated: Oct 16, 2025

Writing and Low-Temperature Characterization of Oxide Nanostructures
Published on: July 18, 2014
Analysis of Interface Phenomena for High-Performance Dual-Stacked Oxide Thin-Film Transistors via Equivalent Circuit
Changik Im1, Jiyeon Kim2, Nam-Kwang Cho1
1Program in Nano Science and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Gwanak-ro 1, Gwanak-gu, Seoul 08826, Republic of Korea.
Abstract:
Oxide thin-film transistors (TFTs) have attracted much attention because they can be applied to flexible and large-scaled switching devices. Especially, oxide semiconductors (OSs) have been developed as active layers of TFTs. Among them, indium-gallium-zinc oxide (IGZO) is actively used in the organic light-emitting diode display field. However, despite their superior off-state properties, IGZO TFTs are limited by low field-effect mobility, which critically affects display resolution and power consumption. Herein, we determine new working mechanisms in dual-stacked OS, and based on this, we develop a dual-stacked OS-based TFT with improved performance: high field-effect mobility (∼80 cm2/V·s), ideal threshold voltage near 0 V, high on-off current ratio (>109), and good stability at bias stress. Induced areas are formed at the interface by the band offset: band offset-induced area (BOIA) and BOIA-induced area (BIA). They connect the gate bias-induced area (GBIA) and electrode bias-induced area (EBIA), resulting in high current flow. Equivalent circuit modeling and the transmission line method are also introduced for more precise verification. By verifying current change with gate voltage in the single OS layer, the current flowing direction in the dual-stacked OS is calculated and estimated. This is powerful evidence to understand the conduction mechanism in a dual-stacked OS-based TFT, and it will provide new design rules for high-performance OS-based TFTs.
More Related Videos
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Modeling of Diode Forward Characteristics
Small-Signal Analysis of MOSFET Amplifiers
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Field Effect Transistor
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...

