Preparation of Magnetic Hydrogel Microparticles with Cationic Surfaces and Their Cell-Assembling Performance

Cationic magnetic hydrogel microparticles with high retention on cell surfaces were prepared using a two-step procedure. Using these magnetic hydrogel microparticles, cells were clustered with each other, and cell aggregates were prepared effectively. Cross-linked poly(vinyl alcohol) (PVA) hydrogel microparticles containing iron oxide nanoparticles were prepared. The diameter of the microparticles was in the range of 200-500 nm. Water-soluble cationic polymers containing both trimethyl ammonium (TMA) groups and phenylboronic acid (PBA) groups were synthesized for the surface modification of the microparticles. To regulate the composition, electrically neutral phosphorylcholine groups were introduced into the polymer. Covalent bonds were formed between the hydroxy groups of PVA microparticles and PBA groups in the polymer. The surface zeta potential of the microparticles reflected the composition of the TMA groups. The particles responded to an external magnetic field and clustered rapidly. Microparticles were adsorbed on the floating cell surface and induced cell aggregation quickly when a magnetic field was applied. Under the most effective conditions, the diameter of the cell aggregates increased to approximately 1 mm after 30 min. Denser cell aggregates were formed by the synergistic effects of the magnetic field and the properties of the microparticles. The formed cell aggregates continued to grow for more than 4 days under an applied magnetic field, indicating that the ability of the cells in the aggregate to proliferate was well maintained.