Waste expanded polystyrene modified with H₂SO₄/biodegradable chelating agent for reuse: As a highly efficient...

Untreated wastewater containing fluoroquinolone antibiotics poses serious hazards to aquatic species and human health; therefore, treatment of waste expanded polystyrene (EPS) is a crucial environmental matter. In this study, waste EPS was modified with a H₂SO₄/biodegradable chelating agent, [S,S]-ethylenediamine-N,N'-disuccinic acid (EDDS), and used for highly efficient adsorption of the fluoroquinolone antibiotic ciprofloxacin. When ciprofloxacin of 25 mg/L was used, the H₂SO₄-modified EPS (EPS_H2SO4) adsorbed 60.5% of the ciprofloxacin. During sulfonation, adding a low dose of EDDS markedly improved the adsorption ability of EPS_H2SO4+EDDS. The optimal modification conditions were 95% H₂SO₄, 0.002 M EDDS, 80 °C, and 40 min. The increased adsorbent doses enhanced the adsorption. Approximately 0.2 g/L of EPS_H2SO4+EDDS could effectively adsorb 97.8% of the ciprofloxacin (554.3 mg/g) within 30 min. Solution pH₀ greatly influenced the adsorption, and the most suitable pH₀ was 6. The Langmuir isotherm accurately described the adsorption behaviors of both EPS_H2SO4 and EPS_H2SO4+EDDS (R² = 0.997-0.998). The adsorption ability of EPS_H2SO4+EDDS (q_max = 1250 mg/g) was 32 times higher than that of EPS_H2SO4 (q_max = 38.6 mg/g). A total of 1 M HCl effectively regenerated the exhausted adsorbent. The optimal solid/liquid ratio and time were 0.08 g/20 mL and 60 min, respectively. The regenerated EPS_H2SO4+EDDS maintained a high adsorption ability (87.2%) after 10 regeneration cycles. The results thus indicate that the EPS_H2SO4+EDDS adsorption-regeneration process is a potential approach to remove ciprofloxacin from water.