Related Experiment Video
Updated: Oct 16, 2025

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
Published on: November 1, 2018
Reinforced Concrete Beam under Support Removal-Parametric Analysis
1Faculty of Civil Engineering and Architecture, Opole University of Technology, 45-758 Opole, Poland.
Abstract:
This paper investigates the behaviour of a reinforced concrete beam under a support removal. A detailed parametric analysis is carried out, covering the effect of support removal rate on dynamic response. The linear elastic and nonlinear inelastic responses are computed and studied in detail. Critical parameters during the structural response are identified. In order to determine the ultimate load, the vertical pushover analysis is performed. The key parameters driving the beam response are assumed as random variables, and respective reliability study makes it possible to check the overall uncertainty of the dynamic response. In particular, the response spectrum measuring the effect of support removal rate has been computed. It has been demonstrated that the critical vertical response occurs when the time of support removal is up to to 17% of the first natural period. The vertical pushover analysis results in obtaining capacity curves and showed the order in which two plastic hinges occur for various load patterns. Finally, the reliability-based sensitivity analysis indicates the geometric cross-section cover and height are the most sensitive parameters of the beam response.
Related Concept Videos
Prismatic Beams: Problem Solving
The design begins with analyzing the beam as a free body to identify moments and force balances, thereby determining support reactions. Next, the...
Internal Loadings in Structural Members: Problem Solving
To illustrate this, let's consider a beam OC of 5 kN, inclined at an angle of 53.13° with the horizontal and supported at both ends. Determine the internal...
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
Deformation of a Beam under Transverse Loading
The insights from the bending moment diagram extend to...
Shearing Stresses in a Beam: Problem Solving
Elastic Curve from the Load Distribution
For all beams, the analysis of the beam's reaction to distributed loads begins by understanding the relationship between a beam's load and the resulting shear forces and bending moments.

