Study of the Properties of Blended Cements Containing Various Types of Slag Cements and Limestone Powder

It is currently vital to use more environmentally friendly cementitious composites, such as blended slag-limestone cements. However, many properties of slag-limestone cements are not yet fully research, especially in regards to the effect of limestone properties on properties of mortars and concrete. In the research, three types of slag cements were mixed with two types of limestone to obtain multi-component slag-limestone cements. Tests of rheological properties, heat of hydration, and compressive strength were conducted to ascertain the effect of limestone on the cement properties and to check the viability of this type of cement for engineering practice. It was found that the addition of up to 10% of limestone to slag cements did not have negative effects on tested properties; however, the exact influence of limestone was dependent on limestone particle size distribution. Increasing the amount of limestone in limestone-slag cements to 15% significantly decreased the compressive strength of the mortars and decreased hydration heat but had no significant effect on rheological properties.