Related Experiment Video
Updated: Oct 15, 2025

Combustion Characterization and Model Fuel Development for Micro-tubular Flame-assisted Fuel Cells
Published on: October 2, 2016
Experimental study on the explosion characteristics of hydrogen-methane premixed gas in complex pipe networks
Jinzhang Jia1,2, Yinuo Chen3,4, Guangbo Che5
1College of Safety Science and Engineering, Liaoning Technical University, Fuxin, 123000, Liaoning, China.
Abstract:
To explore the overpressure evolution laws and flame propagation characteristics in complex pipe networks after the addition of hydrogen to methane, we experimentally studied the explosive pressure wave and flame wave propagation laws for three different premixed gas mixtures with hydrogen-methane concentrations of 0, 10% and 20% when the equivalence ratio was 1. Experimental results indicate that the maximum explosion overpressure of the premixed gas increases with increasing distance from the explosion source, and it shows a gradually decreasing trend. In the complex pipe network, an overpressure zone is formed in the B-E-H and D-E sections of the network. The flame temperature is superimposed with the superimposition of the pressure, showing a trend of first increasing, then decreasing, then increasing, and finally decreasing in the complex pipe network. The flame arrival time increases with increasing distance, and the maximum flame speed shows a decreasing trend. The peak overpressure and maximum flame velocity of the premixed gas under a hydrogen volume fraction of 20% are 1.266 MPa and 168 m/s. The experimental research results could provide important theoretical guidelines for the prevention and control of fuel gas explosions in urban pipe networks.
More Related Videos
07:24Combustion Chemistry of Fuels: Quantitative Speciation Data Obtained from an Atmospheric High-temperature Flow Reactor with Coupled Molecular-beam Mass Spectrometer
Published on: February 19, 2018
09:32Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
Published on: November 20, 2014
Related Concept Videos
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...
Flame Photometry: Overview
Behavior of Gas Molecules: Molecular Diffusion, Mean Free Path, and Effusion
General Characteristics of Pipe Flow II
The distance to reach a fully developed flow is called the entrance length and depends on the...
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
General Characteristics of Pipe Flow I
The classification of fluid...