A method for void fraction measurement of bubble/slug flow in small channels based on contactless impedance detection

The flow parameter measurement of the gas-liquid two-phase flow in small channels is very crucial and challenging in both academia and industry. Conventional techniques based on radiations, optics, acoustics, or electrics most lose their superiorities in the scenario with small channels due to the spatial limitation and the online and contactless measurement requirements. In addition, the conductive characteristic of the two-phase flow is equivalent to an impedance rather than a resistance due to the existence of multi-phases. The equivalent impedance information of the two-phase flow, especially the imaginary part, is promising to provide more flowing details but has seldom been detected or analyzed. In this paper, a method for the void fraction measurement of bubble/slug flow in small channels is proposed. The method implements void fraction measurement in a contactless way, based on the acquisition of the total impedance information of the gas-liquid two-phase flow. First, a new contactless impedance detection sensor is designed, based on the simulated inductor technique and the analog phase sensitive demodulation technique, to obtain the complete equivalent impedance information of the two-phase fluid. Then, based on the flow pattern identification result, the void fraction measurement model is developed, which is a fusion of the relationships between the void fraction and the real part/the imaginary part of the equivalent impedance information, respectively. Experimental results on prototypes with different inner diameters (2.48, 3.64, and 4.52 mm, respectively) validate the effectiveness of the proposed void fraction method. The maximum void fraction measurement biases are within 5.0%.