Related Experiment Video
Updated: Oct 13, 2025

Engineering Adherent Bacteria by Creating a Single Synthetic Curli Operon
Published on: November 16, 2012
Carrier surface modification for enhanced attachment and growth of anammox biofilm
Xin Tian1, Alex Schopf1, Bianca Amaral-Stewart1
1Department of Civil Engineering, University of Ottawa, 161 Louis Pasteur, K1N 6N5 Ottawa, ON, Canada.
Abstract:
This study investigates and compares the ammonia removal kinetics, attachment, biofilm development and anammox bacteria enrichment on various surface modified carriers throughout the 163 days of start-up of an MBBR system: virgin, dextran-functionalized carriers, silica-functionalized and pre-seeded denitrifying carriers. Silica-functionalized carriers along with pre-seeded denitrifying carriers induced significant higher kinetics, faster biofilm growth and greater anammox bacteria enrichment during the 64 days of operation compared to non-modified virgin and dextran-functionalized carriers. The elevated anammox bacteria counts along with the elevated kinetics of all carriers measured at day 106 indicated that the completed biofilm growth and biofilm maturation are achieved prior to or at day 106 of start-up. The NH4+-N removal rate for virgin, dextran-functionalized, silica-functionalized and pre-seeded denitrifying carriers were achieved 0.684 ± 0.019, 0.608 ± 0.016, 0.634 ± 0.017 and 0.665 ± 0.018 g NH4+-N/m2/d, respectively, at day 106. The results demonstrate that the silica-functionalized and pre-seeded denitrifying carriers offer advantages during the early stage of start-up while the dextran-functionalized carriers did not reduce the start-up period for anammox biofilm.
Related Concept Videos
Surface Appendages of Archaea
Biofilms

